Peelable Clear Lacquer - Peelable Clear Lacquers

Introduction :

This is specially formulated solvent based air drying  system which sets rapidly on application as a thin coat and provides protection to underneath painted surface during handling, transportation or shipment etc. The coating can be peeled off in the form of continuous film with little efforts, keeping the underneath paint layer unaffected.

Key Properties :

1. Suitable for application by brush or spray
2. Sets rapidly
3. V. good resistance to handling
4. Excellent water resistance
5. Excellent flexibility
6. Easy to apply and remove

Product Data :

Appearance	Colorless clear liquid
Viscosity	Around 35 sec by FB4 @ 30o  C For Spraying
Viscosity	Around 60 sec by FB4 @ 30o  C For Brushing

Application Method :

•	Bring down the viscosity suitable for spraying using TUFF COAT Thinner ST-102,if required. For brushing no thinning  is required.
•	Apply three to four coats at an interval of 5-10 minutes to achieve DFT of 25-30microns.Maintain pressure 50-60 PSI.

Scope of Application :

Due to excellent all round properties the coating has versatile application in diversified fields viz. Conrol cabinets, various equipments, export quality jobs especially those requiring heavy handling and shipment. The coating can be suitably applied on properly cured stoving enamel, Epoxy Paints, PU paints, powder coatings without affecting aesthetics of the articles. Being a clear coat it does not hide the original shade of the coated article.

Only limitations of the coating is that it is not suitable for application on ( A/D ) Air drying systems. Also note that the Heat Stability of the coating is Max. 60^o C. Do not apply in Acidic Environment or do not keep at Acidic Environment after application.